top of page
image_edited.png
image.png
image.png

Standard-Line wall housing
Very strong, robust steel construction. Compact housing for wall mounting

image.png
image.png
image.png

  • Compact housing for wall mounting.

  • Designed for indoor use as standard.

  • Available in 20 different standard dimensions, according to our table.

  • Housings in special dimensions and stainless steel housings can be supplied on request
    are offered.

 

TECHNICAL DATA

 

material

Sheet steel

 

Protection class

IP 65 according to EN 60529

 

Surface treatment
Housing body, door, blank cover – powder-coated in RAL 7035 (epoxy-polyester coating with coarse grain structure, for indoor applications). A special coating with increased resistance to atmospheric environmental influences can be offered on request.


Mounting plate

Aluzinc

 

Notice
Housing body, door and blank cover can be
made of stainless steel.

 

image.png
image.png
image.png
image.png

Standard-Line control cabinets
Very strong, robust steel construction. Compact housing for wall mounting

image.png
image.png

  • Compact housing for wall mounting.

  • Designed for indoor use as standard.

  • Available in 20 different standard dimensions, according to our table.

  • Housings in special dimensions and stainless steel housings can be supplied on request
    are offered.

 

TECHNICAL DATA

 

Standard conformity
The cabinets were manufactured according to the standard PN-EN 62208.
Protection class of the housing: IP 55 according to PN-EN 60529

Material and surface treatment
Cabinet frame - sheet steel, galvanized
Doors, walls, bases - sheet steel powder-coated in RAL 7035 (epoxy-polyester coating with coarse structure, for indoor applications).
Mounting plate, swivel frame - sheet steel and profiles, galvanized mounting rails - sheet steel alu-zink.

 

SCOPE OF DELIVERY

Cabinet in standard design: frame, front door with double-bit lock (without swivel lever), rear wall, mounting plate for the entire height of the cabinet, top cover, sliding plates for the base plate of the cabinet frame. Side walls, plinths, transport eyes, swivel frame and other accessories must be ordered separately.

image.png
image.png
image.png
image.png
image.png
image.png
image.png

CONSTRUCTION DESCRIPTION

 

  • Bolted cabinet frame
    Bolted construction made of closed profiles that provide high rigidity. The shape of the profile ensures full symmetry of the cabinet frame and allows the door and covers to be mounted in any lateral plane. Each profile is perforated in two planes at a scale of 25 mm, which allows any internal installation. The material used ensures higher corrosion resistance and easy galvanic connection of unpainted elements mounted directly on the frame. This makes it possible to avoid additional grounding connections. The perforation is designed for M6 self-tapping screws and special M8 cage nuts. The modular arrangement of the openings in the cabinet frame complies with the EN 60917 standard.

 

  • door
    The door is made of powder-coated sheet steel RAL 7035. Can be mounted on the frame at any level with four hinges with an opening angle of 150°. Thanks to its symmetrical design, the door can be mounted as a right-hand or left-hand door. Its standard equipment is a stiffening frame with perforations in 25 mm increments. The standard door is equipped with a 4-point bascule lock. The cabinets with a width of 1000 and 1200 mm have double-leaf doors and the cabinets with a width of 800 and 600 mm have single-leaf doors. On request, these can be designed as glazed doors or doors with ventilation.

 

  • Rear wall and side walls
    Easy and quick assembly using fastening screws. Due to the symmetry of the frame, they can be used alternately in cabinets with the same width and depth. The rear and side covers are made of powder-coated sheet steel in RAL 7035 as standard. M8 earthing bolts are provided in the standard version.

 

  • Top cover
    Cover made of sheet metal, powder-coated RAL 7035 with foam seal. Serves as the upper plate. It is available in the full version or including an opening (380 x 380 mm or 380 x 210 mm) for a blank cover or a fan panel.

 

  • Base plate
    Drilled plate with 3 sliding plates (same as in the SZE2 cabinet). The plates are fixed with special deep-cut screws that ensure the continuity of the equalizing connections (grounding). It is possible to dismantle the lower plate together with the plates, thus obtaining a cable passage practically with the dimensions of the cabinet frame.

 

  • Mounting plate
    As standard, the cabinet is equipped with a galvanized mounting plate (3 mm thick). It can be mounted at any cabinet depth. One advantage is that the plate can be attached completely to the frame of the rear cabinet area, which means that the mounting space in the cabinet can be fully used. In the standard version, the mounting plate is provided with guides that make it easier to install the plate in the cabinet.

 

  • Grounding
    All necessary elements are provided with M8 screws, which enable earthing to the cabinet frame in any area.

 

  • Compatibility with installation systems from other manufacturers
    The design of the SZE3 cabinet frame enables the use of the Lütze LSC cabling system frame

STANDARD-LINE
 ENCLOSURE SYSTEMS

Wall-mounted enclosure
Control cabinet
image.png
bottom of page